Dispensing Hot Water; Adjusting Beverage Settings - Siemens TI 91 Série Mode D'emploi

Machine à expresso automatique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en Operating the appliance
Pressing the rotary selector once
Note:
can prematurely stop the dispensing of
milk or coffee; pressing the rotary
selector twice stops the drink
dispensing completely.
Milk froth or warm milk
The appliance is switched on. The water
tank has been filled.
The milk container filled with milk is
connected.
Place a cup or a glass under the
1.
outlet system.
Select "Milk froth" or "Warm milk"
2.
with the rotary selector.
The name of the drink and the currently
active values are shown on the display.
To change the settings for the
3.
selected drink

~ "Adjusting beverage settings"

on page 44
To begin dispensing the drink, press
4.
the rotary selector.
Milk froth or warm milk is dispensed
into the cup or glass.
To prematurely stop dispensing
Note:
the drink, press the rotary selector
again.

Dispensing hot water

Before dispensing hot water,
Note:
clean the milk system and remove the
milk container. If the milk system is not
cleaned, the dispensed water may
Button
Function
Selecting the coffee
"
strength, ground coffee
Milk/coffee mixing ratio
milk
ml
Cup size
2 cups at once
#
44
contain small quantities of milk.
~ "Cleaning the milk system"
on page 51
:
Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
The appliance is switched on. The water
tank has been filled.
Place a cup under the outlet system.
1.
Remove the milk container, if
2.
connected.
Select "Hot water" with the rotary
3.
selector.
To change the settings for the
4.
selected drink
~ "Adjusting beverage settings"
on page 44
To begin dispensing the drink, press
5.
the rotary selector.
Hot water is dispensed into the cup.
To prematurely stop dispensing
Note:
the drink, press the rotary selector
again.
Adjusting beverage settings
Once you have selected a drink, you
can adjust certain values depending on
the drink. To do so, please use the
following buttons and the rotary
selector:
Selection
very mild
mild
normal
high
Setting share of milk in %
(only for coffee drinks with milk)
Adjustment of the volume in ml increments.
Not available for ristretto.
Place 2 cups under the outlet.
very strong
aromaDoubleShot strong
aromaDoubleShot strong +
Ground coffee

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ti903509de/02

Table des Matières