Before Using For The First Time; Fill Coffee Bean Container; Setting The Language; Setting The Water Hardness - Siemens TP5 Série Notice D'utilisation

Masquer les pouces Voir aussi pour TP5 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
en Before using for the first time

Fill coffee bean container

ATTENTION!
Unsuitable beans can block up the
grinder.
Only use pure, roasted bean mixes
that are suitable for use in fully auto-
matic coffee or espresso machines.
Do not use glazed coffee beans.
Do not use caramelised coffee
beans.
Do not use coffee beans that have
been treated with additives contain-
ing sugar.
Do not add ground coffee.
Open the lid.
1.
Fill with the coffee beans.
2.
The appliance will adjust to the cof-
fee beans with the next dispensing
process.
Close the lid.
3.
Tip: To keep the coffee beans at their
best, store them in a sealed container
in a cool place.
You can keep the coffee beans in the
bean container for a number of days
without them losing their aroma.

Setting the language

Press
to switch the appliance on.
1.
The display will show the language
a
that is preset.
Press
or
2.
shows the desired language.
Press
⁠ .
3.
Tip: You can change the language at
any time.
→ "Overview of the basic settings",
Page 23

Setting the water hardness

It is important to set the water hardness
correctly, so that the appliance indic-
ates in good time that it needs descal-
16
until the display
ing. You can use the enclosed test strip
to determine the water hardness, or
ask your local water company.
Briefly dip the test strip in fresh tap
1.
water.
Allow the water to drip off the test
2.
strip.
The test strip will indicate the water
a
hardness after 1 minute.
If a water softening system is in-
3.
stalled in your house, select "Soften-
ing system".
Press
or
4.
shows the desired water hardness.
The table shows the allocation of the
levels to the different degrees of wa-
ter hardness:
Level
German de-
grees in °dH
1
1-7
2
8-14
3
15-21
1
4
22-30
1
Factory setting (may vary according to
model)
Press
⁠ .
5.
Check whether the bean container
6.
has been filled.
Press
⁠ .
7.
The appliance now rinses itself.
a
When the symbols for drink selection
a
and the buttons light up on the oper-
ating panel, the appliance is ready
for use.
Tip: You can change the water hard-
ness at any time.
→ "Overview of the basic settings",
Page 23
until the display
Total hard-
ness in
(mmol/l)
0.18 - 1.25
1.42 - 2.49
2.67 - 3.74
3.92 - 5.34

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tp501r09Tp503r0pTp503r09

Table des Matières