Technical Data; Ec Declaration Of Conformity - GreenWorks G40HT Manuel De L'utilisateur

EN
Problem
There is too much
noise and/or vibra-
tion during opera-
tion.
8

TECHNICAL DATA

Voltage
No load speed
Blade speed
Blade length
Cutting capacity
Weight (without battery pack)
Measuered sound pressure level
Guaranteed sound power level
Vibration
Uncertainty
Battery model
9 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
Possible cause Solution
1. Stop the ma-
chine.
2. Remove the
battery.
The parts are loos-
3. Inspect for
en.
damage.
4. Check and
tighten loose
parts.
Do not use the ma-
The parts have
chine and speak to
damage.
service center.
40V
2800
(±10%) /min
2800(±10%) /
min
610 mm
27 mm
2.7 kg
78.6 dB(A),
K
PA
100 dB(A)
<2.5 m/s
1.5 m/s
G40B2,G40B2
5,G40B4,G40
B5,G40B6 and
other BAF ser-
ies
English
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Address:
Name and address of the person authorised to compile the
technical file:
Name:
Address:
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
=3 dB(A)
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
2
Furthermore, we declare that the following parts, clauses of
2
European harmonised standards have been used:
• EN 60745-1,EN 60745-2-15,EN 55014-1,EN 55014-2,
EN ISO 3744,ISO 11094,IEC 62321-3-1,IEC 62321-4,
IEC 62321-5,IEC 62321-6,IEC 62321-7-1,IEC
62321-7-2,IEC 62321-8
Measured sound pow-
er level:
Guaranteed sound
power level:
Conformity assessment method to Annex V / Directive
2000/14/EC.
Place, date: Malmö,
03.03.2019
6
GLOBGRO AB
Globe Group Europe
Riggaregatan 53 211 13 Malmö Sweden
Peter Söderström
Riggaregatan 53 211 13 Malmö Sweden
Hedge Trimmer
HTF313
See product rating label
See product rating label
L : 98.6 dB(A)
WA
L : 100 dB(A)
WA.d
Signature: Ted Qu, Quality Director