Factory Reset; Troubleshooting; Cleaning / Maintenance; Cleaning & Maintenance - Häfele LockerLock LL 200 Mode D'emploi

9.2 Factory reset

10. Troubleshooting

11. Cleaning / maintenance

11.1 Cleaning

For step-by-step instructions "Reset - Simple reset"
see illustrations starting on page 59.
A factory reset resets the terminal to the factory settings. All data (configuration files,
keys and audit trails) is deleted.
A factory reset may be required in the following cases:
• Complete deletion of all data (e.g. in the event of return to stocks/warehouse)
• Loss of programming and erasing key in stand-alone mode
• Resetting of software mode to stand-alone mode
For step-by-step instructions "Reset - Factory reset"
see illustrations starting on page 60.
If an attempt is made to lock a door with a user key
Acoustic signal is heard
twice.
Acoustic signal is heard
three times.
Red and green LEDs on
the inside flash three
times alternately.
Other malfunctions.
NOTE
Damage to product due to incorrect cleaning!
> Do not use cleaners containing alcohol, organic solvents or
thinners.
> Do not use abrasive materials.
> Do not use pressure or steam cleaning devices.
Clean outer surfaces of product if necessary:
• with a dry, soft cotton cloth or
• a damp cloth and a little washing-up liquid or neutral cleaner
User key is not authorised.
Replace batteries immediately.
Please contact your Dialock technician or Häfele.
19