Repair And Warranty - Megger LCB2000/2 Guide De L'utilisateur

Repair and Warranty

The instrument circuit contains static sensitive devices,
and care must be taken in handling the printed circuit
board. If the protection of an instrument has been
impaired it should not be used, and be sent for repair
by suitably trained and qualified personnel. The
protection is likely to be impaired if, for example, the
instrument shows visible damage, fails to perform the
intended measurements, has been subjected to
prolonged storage under unfavourable conditions, or
has been exposed to severe transport stresses.
New instruments are guaranteed for 3 year period
from the date of purchase by the user.
Note: Any unauthorised prior repair or adjustment will
automatically invalidate the Warranty.
Instrument Repair and Spare Parts
For service requirements for Megger Instruments
contact:-
Megger Limited or
Archcliffe Road
Dover
Kent, CT17 9EN.
England.
Tel: +44 (0) 1304 502243
Fax: +44 (0) 1304 207342
or an approved repair company.
Megger Inc.
Valley Forge Corporate Center
2621 Van Buren Avenue
Norristown, PA 19403
U.S.A.
Tel: (610) 676-8579
Fax:(610) 676-8625
Approved Repair Companies
A number of independent instrument repair companies
have been approved for repair work on most Megger
instruments, using genuine Megger spare parts. Consult
the Appointed Distributor/Agent regarding spare parts,
repair facilities and advice on the best course of action
to take.
Returning an Instrument for Repair
If returning an instrument to the manufacturer for repair,
it should be sent freight pre-paid to the appropriate
address. A copy of the Invoice and of the packing note
should be sent simultaneously by airmail to expedite
clearance through Customs. A repair estimate showing
freight return and other charges will be submitted to the
sender, if required, before work on the instrument
commences.
41