Megger LCB2000/2 Guide De L'utilisateur page 3

Dear Customer,
Thank you for purchasing one of the new premium range
of Combinations products from Megger Limited. The
Combinations concept was created after listening to the
views of many users, and combine quality and versatile
features with the reliability and dependability you expect
from Megger products. Every instrument is designed and
manufactured to exacting standards and as such is
guaranteed for a full three years.
The Megger LCB2000/2 and LCB2500/2 are part of an
advanced range of combined loop and circuit breaker
testers designed to fully test RCDs and measure loop
impedance and prospective short circuit current, (PSCC),
on single and three phase systems rated up to 300V ac
r.m.s. to earth. Designed to comply with all relevant wiring
regulations, the units feature both standard and low
current loop test ranges guaranteed not to trip RCDs rated
at 30mA and above. A comprehensive range of RCD test
facilities is provided to cater for the most demanding
situations whilst ingenius facilities such as ramp and auto-
sequence tests provide diagnostics for troubleshooting
nuisance tripping and reduce the time taken for a series of
tests considerably.
2
Results are clearly indicated on a large backlit liquid
crystal display. The LCB2500/2 also allows results to be
stored against specific circuit and distribution board
references. This instrument is directly compatible with
AVO ® PowerSuite ™ for Windows
NICEone software and stored data may be quickly
™
downloaded for creation of professional installation test
certificates. Alternatively direct connection to a serial
printer is possible.
™ , PowerSuite XPress and