Burners" Technical Data Table; Rules For Converting And Installing For Other Types Of Gas; Substituting The Nozzle In Open Cooking Rings; Checking Functioning - Lotus CF4-68GEM Instructions Pour L'installation Et L'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

(primary air) (see page 3 fig. 3). The volume flow of primary air must be regulated so that the flame does not tend to

come away from the burner when it is cold or backfire when the burner is hot.

Burner max 3,5 KW-min 1,2kW

Burner Injector 1/100 mm

Min. output adjustment 1/100 mm

Consumption

Primary air h=mm

Burner max 5,5 KW-min 1,8kW

Burner Injector 1/100 mm

Min. output adjustment 1/100 mm

Consumption

Primary air h=mm

RULES FOR CONVERTING AND INSTALLING FOR OTHER TYPES OF GAS

Our appliances are tested and regulated with liquid gas (see data plate).

The conversion or adaptation to another type of gas must be carried out by a specialized technician. The nozzles for the

various types of gas are supplied in a packet and are marked in hundredths of mm (see "burners" technical data table).

SUBSTITUTING THE NOZZLE IN OPEN COOKING RINGS

Remove the grills, the burners and the containers, substitute the nozzles with the right ones, using a suitable

spanner, unscrewing the blockage screw and relative jam nut. After regulating, screw back the screw and the

jam nut, regulate minimum output by turning the screw to the right or to the left until the thermal power

reaches 1,2 KW for the burner of 3,5 KW, and 1,8 for the burner of 5,5 KW.

Warning: For functioning with liquid gas, the screw for regulating minimum output must be blocked completely.

•

The appliance contains the instructions necessary for use.

•

Check the appliances for gas leaks.

•

Check the lighting and flame of the main burner.

•

We urge the user to follow the instructions when using the appliance.

With prolonged use of the appliance, it is essential to carry out regular maintenance for the safe functioning of the

appliance; we therefore recommend drawing up a contract for after sales service.

Maintenance must be done only by specialised personnel, observing the norms in force and our indications.

OPEN COOKING RINGS: the gas-cocks, control unit, ignition plugs, thermocouples and burners can be changed by

removing the grills and control panel.

ELECTRIC OVEN: is it possible the replacement of heating element and the thermostat

•

Cut power off to the appliance

•

Remove the glass cover from the lamp holder

•

Unscrew the lamp

•

The new lamp must have the following characteristics:

•

be able to withstand a heat of up to 300°C

•

power: 15W.

•

voltage: 230V 50Hz.

Attention! The appliance must only be used under surveillance.