Location Of Main Switch; General Use Of Keys; Acoustic Signals; The Handle - Struers Rotoforce-3 Mode D'emploi

Location of Main Switch

General Use of Keys

Acoustic Signals

The Handle

Changing to Another Lupo Unit
(Accessory)
10
RotoForce-3
Instruction Manual
 The main switch is located on the back of RotoForce-3.
m
n MENU
, and SELECT
machine has been stopped.
L
n SELECT
can only be activated when MENU
When pressing a key, a short beep indicates that the com-
mand has been accepted, whereas a long beep indicates that
the key cannot be activated at the moment.
The handle of RotoForce-3 is used to lock it in working
position.
Handle in Top Position: when the handle is moved up into
its top position, RotoForce-3 can be moved horizontally and
placed correctly over the preparation disc.
Handle in Bottom Position: when RotoForce-3 is positioned
correctly, move the handle down to lock RotoForce-3 in its
working position.
n Set the mode switch on Lupo to STOP
n Remove the current Lupo. Remove the silicon tube from the
nipple underneath Lupo.
n Place the other Lupo (accessory) with an alternative lubricant
in the connector on the supporting arm. Connect the silicone
tube to the nipple.
L
can only be activated when the
o
position.
m
is selected.