Honda Miimo HRM40 Guide D'installation page 17

Connect the wire to the docking station
5.6
after the perimeter wire has been laid around the entire cutting area.
Remember to leave 1 m straight line coming back from garden to the docking station.
Corner placement
Edge of the lawn placement
Cut the perimeter wire
5.7
and strip off 10 – 15 mm of insulation.
After a few weeks, the wire will disappear under the grass. Leave 5 cm of cable for free play.
For safety reasons blades cannot reach up to the edge of the mower therefore approximately 20 cm of lawn around the fixed
object and around the edge of the lawn will not be mown.
Connect to the
5.8
left hand (red)
connector point.
Clip over the
5.9
docking station
cover.
GB
17