Steering P; The Brake P; The Carrycot P; The Joey Carrycot P - Mutsy 4Rider Mode D'emploi

English
the other positions.
The restaurant position
· This is the lowest possible position for
the push bar. This position can be used
for improving compactness when the
frame is used in the unfolded position,
for example in a restaurant.
Steering
The swivel system (i)
· Move the front handle (under the foot
rest) to the right. The front wheels will
now swivel.
· For blocking the swivel system: move
the front handle to the left. The swivel
system automatically locks when the
front wheels are moved back into their
original, straight position.
The brake (j)
· Gently push down the back of the brake
pedal positioned on the rear frame with
your foot to block the brake.
· Gently push down the front of the brake
pedal positioned on the rear frame to
unblock the brake.
The carry cot (0-9 kg)
· The carry cot is suitable for babies who
cannot sit unaided, roll over or push up
on their hands and knees, with a maxi-
mum weight of 9 kg.
· The carry cot is used to transport your
baby lying down. You can remove the
carry cot and leave your child lying in it
in other places.
Assembly (k)
· Place the carry cot with the fasten-
ing parts above the universal fixation
points of the frame. Push the carry
cot down until it firmly clicks. Make
sure that the carry cot is placed hori-
zontally and that the red surfaces in
the universal fixation points are fully
covered.
Removing the carry cot from the frame
· Push the two release buttons of the
universal fixation points in backward
direction until the carry cot is released.
You can now remove the carry cot from
the frame.
18
· In order to carry the carry cot, the car-
rying straps should be fixed into the
plastic buckles.
· The carry cot can be folded compactly
by first removing the liner and then
pushing the three metal U-shaped
wires forward until the carry cot col-
lapses.
! regularly check the bottom and the car-
rying straps of the carry cot on wear.
The carry cot apron
· To assemble the apron, fasten the
press-studs on the indicated positions.
· To remove the apron, unfasten the
press-studs.
The Joey carry cot (0-9 kg)
· The Joey carry cot is suitable for babies
who cannot sit unaided, roll over or
push up on their hands and knees, with
a maximum weight of 9 kg.
· The carry cot is used to transport your
baby lying down. You can remove the
carry cot and leave your child lying in it
in other places.
Assembly (l)
· Place the carry cot with the fasten-
ing parts above the universal fixation
points of the frame. Push the carry cot
down until it firmly clicks. Make sure
that the carry cot is placed horizontally
and that the red surfaces in the univer-
sal fixation points are fully covered.
Removing the carry cot
· Push the two release buttons of the
universal fixation points in backward
direction until the carry cot is released.
You can now remove the carry cot from
the frame.
· The carry cot can be carried using the
grip of the canopy.
! Regularly check the bottom of the carry
cot on wear.
The canopy
· The canopy of this carry cot is fixed.
· The canopy can be opened by pushing
it forward.
· To close the canopy you have to press
the buttons on both sides and move the
canopy backwards.