Assembly P; The Wheels P; The Frame P - Mutsy 4Rider Mode D'emploi

· Stains in the upholstery or cover can
be treated with a solution of water and
liquid soap without bleach. Always treat
the entire surface. If the pushchair
is wet, allow to dry with the canopy
extended.
· Although Mutsy fabrics have been
selected with the greatest possible care
and have been tested for colour fast-
ness, it is possible that fabric colours
fade. Mutsy is not liable if this hap-
pens.
Pushchair
· Never lubricate the wheels with
oil. If you clean the axles and treat
them with acid-free Vaseline regu-
larly, the wheels will continue to run
smoothly.
· You can also treat the other moving
parts with Teflon spray (dry lubricant).
After spraying on the Teflon, wipe the
product with a soft cloth.
· It is particularly important to ensure
that the locking mechanism and swivel
wheels are treated regularly with Teflon
spray (dry lubricant).
· The frame tubes covered by the lock-
ing mechanism and turning mecha-
nism should also be regularly cleaned
and sprayed. This will ensure that you
enjoy your pushchair without any prob-
lems.
Assembly
Contents of the box
· 1 frame with basket
· 2 front wheels
· 2 rear wheels
Order of assembly
· Assemble rear wheels
· Assemble front wheels
· Release frame lock at left hand side
· Unfold frame
The wheels
Assemble the rear wheels (a)
· Press the button in the centre of the
wheel and insert the wheel axle in
the rear axle. The button can now be
released.
· Slide the wheel axle into the rear axle
until it clicks into position.
Assemble the front wheels (b)
· Slide the front wheels upwards over the
swivel-axles under the foot rest until
they click into place.
Pumping up the tyres (c)
· Push the pump firmly onto the valve
and secure it using the valve clip.
Ensure sufficient tyre pressure by
pumping numerous times.
Disassemble the rear wheels (d)
· Press the button in the centre of the wheel
and pull the wheel axle out of the tube.
Disassemble the front wheels (e)
· Press the button on the front of the
wheels and slide the wheel down.
The frame
Unfolding the frame (f)
· Release frame lock at the left hand
side.
· Set frame to brake position or position
your foot on the bottom frame.
· Lift the push handle up until you can
hear a click.
! Always check whether the pushchair
has been correctly unfolded and locked
before use.
Folding the frame (g)
· Set frame to brake position or position
your foot on the bottom frame.
· Push in the height adjustment button
on the push bar, pull the safety handle
at the left hand side towards you and
simultaneously push forward the push
bar until the frame folds in. When the
frame is entirely horizontal, the frame
lock is automatically activated.
Store the frame upright
· If the frame lock is activated and the
swivel wheels have been blocked, then
the frame can be stored upright.
Adjusting the height of the push bar (h)
· The push bar height can be adjusted to
4 positions.
· Push the height adjustment button on
the push bar.
· By pushing the push bar up or down
and releasing the button, you can feel
English
17