Precautions To Be Taken In The Event Of A Fault With The Device; Other Precautions; Description Of The Device; Principle Of Induction - Novy 1821 Panorama Pro Mode D'emploi

adequate distance (2 cm) between the contents of the drawer
and the bottom of the device to provide good ventilation.
– Do not put flammable objects (for example, sprays) in the
drawer under the hob. If the drawer contains a cutlery holder,
this must be made from heat-resistant material.
2.4 Precautions to be taken in the event of a
fault with the device
– Upon discovering a fault, turn off the device and turn off the
electrical supply.
– Immediately switch off the electrical power to the device if a
crack or split is discovered in the vitro-ceramic glass, then
notify the after-sales service.
– Repairs must only be carried out by specialised personnel.
Never open the device yourself.

WARNING: If the glass cooking surface is broken,
turn off the device to prevent possible electric
shock.

2.5 Other precautions

– Ensure the cooking pan remains in the middle of the cooking
zone at all times. The bottom of the cooking pan must cover
as much of the cooking zone as possible.
– A magnetic field can affect electronic equipment. People with
a pacemaker must first consult the distributor or a doctor.
– Do not use synthetic or aluminium cooking pans: these can
melt on the cooking zones while they are still hot.
– Never use water to put out a fire. Turn off the cooking zone.
Gently cover flames with a cover, fire blanket, or something
similar.

The use of unsuitable pots and pans, or the use
of removable pan warming accessories that
are unsuitable for use with induction hobs, is
not covered by the guarantee conditions. The
manufacturer cannot be held responsible for any
damage caused to the hob and its surroundings that
result from this.

3 DESCRIPTION OF THE DEVICE

The device is an induction cooking plate with integrated
worktop extraction. The induction hob has 4 cooking zones
with an integrated ventilation tower located at the back of the
hob for the removal of cooking fumes.
The hob and cooker hood can be operated separately. You will
find an explanation of the operation of the device further in this
manual.

3.1 Principle of induction

There is an induction coil under each cooking zone. When this
is on, it produces a variable electromagnetic field that produces
an induction current in the bottom of the cooking pan. This
results in the warming up of the cooking pan on the cooking
zone.
Of course, suitable cooking pans are required for this:
– Recommended cooking pans include those with a magnetic
base (you can check this using a magnet): a cast iron kettle,
black iron pan, enamelled metal cooking pans, stainless steel
pans with magnetic base, etc.
– Unsuitable cooking pans include copper, stainless steel,
aluminium, glass, wood, ceramics, pottery, stainless steel
without magnetic base, etc.
The induction cooking zone immediately takes the size of the
cooking pan into account. If the diameter is too small, the
cooking pan will not work. The diameter varies as a function
of the diameter of the cooking zone. Should the cooking pan
not be adjusted to the hob, the
3.2 Technical specifications of the induction
hob
Type
Total power
Energy consumption of
the EChob cooking plate**
Dimensions of cooking
zone front left
Detection cooking pan
Normal*
With Power*
Super Power*
Cooking utensils**
Energy consumption
ECcw**
– 64 –
symbol will continue to flash.
1821 1831 1841
7400 6700 7400
187.4 177.8 177.6 Wh/kg
240x200 Ø 280 Ø 185
Ø 100 Ø 100 Ø 100
2100 2300 1400
2600 3000 -
3700 - -
Ø 150 D B
182.8 178.1 177.3 Wh/kg
W
mm
mm
W
W
W
mm