General Instructions - KitchenAid KSM150PSCH0 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GENERAL INSTRUCTIONS

To Attach
1.
Turn the speed control to OFF.
2.
Unplug mixer or disconnect power.
3.
Loosen the attachment knob by turning it counterclockwise, and remove
the attachment hub cover or flip up hinged hub cover.
4.
Insert the attachment shaft housing into the attachment hub, making
certain the attachment power shaft fits into the square attachment hub
socket. It may be necessary to rotate the attachment back and forth.
When the attachment is in proper position, the pin on the attachment
will fit into the notch on the hub rim.
5.
Tighten the attachment knob by turning it clockwise until the
attachment is completely secured to mixer.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
6.
Plug into a grounded 3 prong outlet.
To Remove
1.
Turn the speed control to OFF.
2.
Unplug mixer or disconnect power.
3.
Loosen the attachment knob by turning it counterclockwise. Rotate the
attachment slightly back and forth while pulling it out.
4.
Replace the attachment hub cover. Tighten attachment knob by turning
it clockwise.
17

Publicité

Table des Matières
loading

Table des Matières