Operating Time; During Operation; Interrupting Function; End Of Function - Gorenje BM 1120 AX Mode D'emploi

EN

Operating time

The desired operating time is selected by turning
the timer button.
For times under 2 minutes, turn the timer button
to a higher time and then go down to the desired
time.
As long as the timer button reads other than zero,
the oven light should be on.
When the operating time is over, the timer emits a
beep and automatically disconnects the oven.

During operation...

It is possible to change the operating time, the
power level or the function while the oven is
functioning, by turning the respective control.
It is possible to open the door of the oven at any
moment while the foods are being cooked. In this
case:
• THE PRODUCTION OF MICROWAVES IS
AUTOMATICALLY INTERRUPTED;
• The grill switches off, but remains very hot;
• The timer stops automatically, indicating the
operating time that is left.
If you wish, you may:
1. Move or turn the foods around to improve
uniformity of the heating process;
2. Select another function, placing the function
selector in another position;
3. Change the operating time that is left, by
turning the Timer Button.
Close the door again. The oven starts to function.

Interrupting function

To interrupt the functioning of the microwave, turn
the Timer Button to ZERO or open the door. If you
wish to cancel the cooking process, turn the
Timer Button to ZERO and close the door.
WARNING: When you finish using the oven,
always turn the Timer Button to zero, because
otherwise the oven will start to function when
you close the door and may be damaged if it
functions when empty.
28

End of Function:

When the set time has elapsed, the oven beeps
and the Timer Button read ZERO.