Resetting Thermal Protection; Cleaning And Sanitizing Instructions - Waring Commercial MMB145 Directives D'utilisation

8. Allow motor to come to a complete stop before
removing container from blender base. Never place
the container on the motor base or remove it from
the motor base while motor is running.
9. Always hold container with one hand when starting and
while blending. Never operate without jar lid.
10. Wash and dry container after each use. see Cleaning
and sanitizing instructions.
11. Unplug to turn off all power to blender.

RESETTING THERMAL PROTECTION

•  Y ourblenderisequippedwithamanualresetswitchto
protect the motor from overheating.
•  I fyourblenderstopsrunningunderheavyuse,orifthe
GreenLEDlightstartstoblinkmuchmorerapidlythan
during normal blending, press the power switch to off and
unplug the power cord. Empty the blender container of all
its contents and allow approximately 5 to 10 minutes for
the motor to cool down.
•  P lugthepowercordbackintotheoutletandcontinue
blending.
•  I fyourblenderdoesnotfunctionproperlyfollowingthis
procedure, discontinue use and contact a certified Waring
Customer service Center.

CLEANING AND SANITIZING INSTRUCTIONS

ThE CoNTAiNER MUsT BE CLEANED AND DRiED AFTER
EACHUSEOFTHEBLENDERACCORDINGTOTHE
FOLLOWINGINSTRUCTIONS.
FAILURETODOSOMAYALLOWRESIDUESOF
PRoCEssED MATERiAL To CoLLECT oN ThE iNTERNAL
SEALSOFTHEBLADEASSEMBLY,RENDERINGTHEM
INEFFECTIVE.
•  W ash,rinse,sanitizeanddrycontainerpriortoinitialuse
and whenever it will not be used again within a period of
1 hour.
8