Important - Waring Commercial MMB145 Directives D'utilisation

3. Repeat step (2) using clean rinse water in place of
washing solution.
Note:INORDERTOMINIMIZEPOSSIBILITYOFSCALDING,
TEMPERATUREOFWASHINGSOLUTIONANDRINSE
WATERMUSTNOTEXCEED115˚F(46˚C),ANDQUANTITY
UsED MUsT NoT EXCEED oNE-QUARTER CoNTAiNER
FULL.
TO SANITIZE AND DRY CONTAINER
1. Wipe down exterior of container with a soft cloth
or sponge dampened with sanitizing solution.
2. Fill container with sanitizing solution, cover, place on
motor base, and run on hi speed for one (1) minute.
Empty container. Dislodge any residual moisture from
blade assembly by placing empty container on motor
base and running on high speed for two (2) seconds.
3. sanitize lid and lid insert by immersing in sanitizing
solution for two (2) minutes.
4. Do not rinse container, lid, or lid insert after sanitizing
is completed. Allow parts to air-dry.
TO CLEAN AND SANITIZE MOTOR BASE
 1.  U NPLUGPOWERCORD.Wipedownexteriorsurfaces
of motor base with soft cloths or sponges dampened
with washing solution, rinse water, and sanitizing
solution. Prevent liquid from running into motor base
by wringing all excess moisture from cloths or sponges
before using them.
DONOTIMMERSEMOTORBASEINWASHINGSOLUTION,
RINSEWATERORSANITIZINGSOLUTION.
2. Allow motor base to air-dry before using.

IMPORTANT

10