Waring Commercial MMB145 Directives D'utilisation page 5

2. With the switch in off
position, place container
on blender base. Be sure
container is fully seated
and that drive coupling is
properly engaged. Plug
blender cord into outlet.
GreenLEDlightwill
illuminate.
3. Put ingredients into container and cover it. Do not fill
above MAX FiLL line.
4. This blender has 2 speed settings: hi and Lo. Press
toggle switch to desired position. To crush ice, always
useHispeedsetting.GreenLEDlightwillblinkwhile
in operation.
NoTE: This blender utilizes a slow start
beginning hi or Lo operation, the unit will start in a lower
speed for 3 seconds and then switch to the full selected
speed. Pulse utilizes a 1-second slow start
a more even blending of ingredients in container.
5. When finished blending, set toggle switch to off
position.
6. This blender is equipped with a Pulse option. hold
toggle switch in down position to engage Pulse
function. Unit will run on hi speed until the toggle
switch is released.
7. Allow motor to come to a complete stop before
removing container from blender base. Never place
the container on the motor base or remove it from
the motor base while motor is running.
8. Always hold container with one hand when starting and
while blending. Never operate without jar lid.
9. Wash and dry container after each use. see Cleaning
and sanitizing instructions.
10. Unplug to turn off all power to blender.
feature. When
™
5
. This allows for
™