Bluetooth - Audio - JVC KD-T915BTS Manuel D'instructions

Bluetooth®
Bluetooth — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
1 Press B SRC repeatedly to select BT AUDIO (or press SOURCE on the
remote control).
• For KD-T711BT: Pressing
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause Press the volume knob.
Press 2 J / 1 K.
Select group or
folder
Reverse skip/ Press S / T.
Forward skip
Reverse/Fast- Press and hold S / T.
forward
26
ENGLISH
enters BT AUDIO directly.
On the remote control
Press d.
Press J / K.
Press H / I.
Press and hold H / I.
To On the faceplate
Press 4 B repeatedly.
Repeat play
[TRACK REPEAT], [ALL REPEAT],
[GROUP REPEAT]*1, [REPEAT OFF]
Random play Press 3 A repeatedly.
[GROUP RANDOM]*1,
[ALL RANDOM], [RANDOM OFF]
Select a file from a Refer to "Select a file to play"
folder/list on page 11.
Switch between Press 5.*2
connected
Bluetooth audio
devices
*1 Depending on the connected device, some devices may not support this feature.
*2 Pressing the "Play" key on the connected device itself also causes switching of sound output
from the device.
Operations and display indications may differ according to their availability
on the connected device.
Listen to iPod/iPhone via Bluetooth
You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. (Page 10)
• If you plug in an iPod/iPhone to the USB input terminal while listening
to iPod BT source, the source automatically changes to iPod FRONT/
iPod REAR/iPod USB source.
Press B SRC to select iPod BT source if the device is still connected via
Bluetooth.
On the remote control
( Not available )
( Not available )
( Not available )
( Not available )