Radio - JVC KD-T915BTS Manuel D'instructions

Radio

Search for a station
1 Press B SRC repeatedly to select FM or AM.
2 Press S / T (or press H / I on the remote control) to search for a
station automatically.
(or)
Press and hold S / T (or press and hold H / I on the remote
control) until "M" flashes, then press repeatedly to search for a station
manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station...
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2
Turn the volume knob to select a preset number, then press the knob.
"MEMORY" appears once the station is stored.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the knob.
Other settings
1
Press and hold .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
[TUNER SETTING] (except for KD-T711BT)
[RADIO TIMER] (For KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS)
Turns on the radio at a specific time regardless of the current source.
1 [ONCE]/[DAILY]/[WEEKLY]/[OFF]: Select how often the timer will be
turned on.
2 [FM]/[AM]/[SIRIUS XM]*1: Select the source.
3 [01] to [18] (for FM/SIRIUS XM)/[01] to [06] (for AM): Select the preset
station.
4 Set the activation day*2 and time.
"M" indicator lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM SRC] in [SOURCE SELECT] after Radio Timer for
AM is selected. (Page 6)
*1, *2: (see page 8)
.
Default: [XX]
7
ENGLISH