Troubleshooting - SilverCrest SKM 10 B1 Mode D'emploi

SilverCrest SKM 10 B1
 Carefully pull the ear pads off the earpiece by
using your fingers.
 Select either the (large) [3] or (small) [4] ear pads
and push them over the earpiece until they slide
into the recess.

Troubleshooting

No sound
 Check the volume set on the playback device.
Increase the volume and/or start playback.
 Make sure that the 3.5 mm jack-type connector [2]
is properly inserted into the audio jack.
Sound output on one side only
 Check the stereo balance setting on the playback
device.
 Make sure that the 3.5 mm jack-type connector [2]
is properly inserted into the audio jack.
12 - English