Power Save Mode - ResMed Lumis Série Mode D'emploi

Once therapy has stopped, the Sleep Report gives you a summary of your therapy session.
Humidifier–Indicates if your humidifier is working properly:
Humidifier working.
Humidifier might be faulty, contact your care provider.
If set by your care provider, you will also see:
Events per hour–Indicates the number of apnoeas and hypopnoeas experienced per hour.
More Info–Turn the dial to scroll down to view more detailed usage data.

Power save mode

Your Lumis device records your therapy data. In order to allow it to transmit the data to your care
provider, you should not unplug the device. However, you can put it into power save mode to save
electricity.
To enter power save mode:
• Press and hold Start/Stop for three seconds.
The screen goes black.
To exit power save mode:
• Press Start/Stop once.
The Home screen is displayed.
My Options
Your Lumis device has been set up for your needs by your care provider, but you may find you want
to make small adjustments to make your therapy more comfortable.
6
Usage hours–Indicates the number of hours of therapy you received last
session.
Mask Seal–Indicates how well your mask sealed:
Good mask seal.
Needs adjusting, see Mask Fit.
Highlight My Options and press the dial to see your
current settings. From here, you can personalise your
options.