Switching Off The Cooler - Dometic Waeco CoolMatic FC40 Notice D'utilisation

CoolMatic FC40
I
NOTE
Place the cooler as shown (fig. 1, page 3). If you operate the box
in a different position it can be damaged.
➤ Connect the cooler, see "Connecting the cooler" on page 25.
A
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
➤ Switch on the cooler on by turning the temperature controller (fig. 2,
page 4) to the right.
Setting the temperature
You can set the temperature to any level using the control knob. The control-
ler regulates the temperature as follows:
– Min. (left limit) = warmest setting
– Max. (right limit) = coldest setting
I
NOTE
The cooling performance can be affected by:
– The ambient temperature
– The amount of food to be conserved
– The frequency with which the door is opened.
6.6

Switching off the cooler

➤ Empty the cooler.
➤ Switch the cooler off.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the cover slightly open. This prevents odour build-up.
EN
Autogoods "130"
Operation
27