Operating Procedures; Preparations - Panasonic WX-CT420 Mode D'emploi

Operating procedures

Preparations

Prior to operating the Belt Pack, confirm that the system
setup for the Belt Pack, Center Module, and other devices
has been completed.
Attach the battery to the Belt Pack.
(Refer to p. 10 "Battery loading & replacement".)
Connect the headset to the Belt Pack.
(Refer to p. 11 "Connecting and disconnecting the headset
plug".)
Wear the Belt Pack and the headset.
Wear the Belt Pack around your waist and the
headset on your head.
Note
The headset can be worn over the left ear or right ear.
Adjust the head pad so that the earphone is
placed on your ear.
12
Rotate the microphone boom so that the
microphone is brought to a position near your
mouth.
Approx. 70° max.
Fasten the clip to your collar, lapel or other
part of your clothing, and secure the cable.
Press the [POWER] button of the Belt Pack to
turn the power on.
When the power is turned on, the voice messages
"Hello", "Headset xx" (xx: ID number registered in the
Center Module) and "Lane x" (x: Connected Lane
number) are heard from the speaker of the headset.