Power Supply Input Wiring Diagram - Toshiba RAS-10G2KVP Série Manuel D'installation

Power supply input Wiring Diagram

Power supply input at Indoor unit Terminal Block (Recommend)
Indoor
Terminal
Block
Power supply input
Outdoor
Terminal
Block
Power supply input at Outdoor unit Terminal Block (Optional)
Indoor
Terminal
Block
Outdoor
Terminal
Block
CAUTION
1. The power supply must be same as the rated of air conditioner.
2. Prepare the power source for exclusive use with air conditioner.
3. Circuit breaker must be used for the power supply line of this air conditioner.
4. Be sure to comply power supply and connecting cable for size and wiring method.
5. Every wire must be connected fi rmly.
6. Perform wiring works so as to allow a general wiring capacity.
7. Wrong wiring connection may cause some electrical part burn out.
8. Incorrect or incomplete wiring is carried out, it will cause an ignition or smoke.
9. This product can be connected to main power supply.
Connection to fi xed wiring : A switch which disconnects all poles and has a contact separation at least 3mm must be incorporated in the fi xed wiring.
01_1115751102-EN.indd 10 01_1115751102-EN.indd 10
Power supply input
10
3/26/2557 BE 12:08 PM 3/26/2557 BE 12:08 PM