Table des Matières
Publicité
Important information
Intended use
The mounting instructions come as part of the Duravit
bathtub and must be read carefully prior to installation.
Target readership and qualifications
The bathtub must only be installed by trained plumbing
engineers.
Explanation of the symbols
Link to the mounting instructions in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and leak-tightness
Do not kink hose
>
Action required
Safety instructions
Product and/or property damage
The breach of local and country-specific regulations
and standards can cause damage to the product and/or
property damage.
> Observe the local installation regulations and any
country-specific standards at all times.
Mounting instructions
Please read pre-installation information sheets prior to
the installation. These are available to download on the
Internet at www.pro.duravit.com.
5
Tilting the bathtub
> Make sure that the edge is not damaged when
tilting the bathtub.
> Place cardboard under the bathtub to protect it.
6
Installing the cable-driven waste and overflow
The connection hose #790166 is recommended for
installing a cable-driven waste and overflow with a
bathtub spout and base inlet.
5
BA_M_Vero Air_FST/16.07.1
Publicité
Table des Matières
