Safety Instructions; Mounting Instructions - DURAVIT XViu 700443 Notice De Montage

Mounting instructions information
The mounting instructions come as part of the Duravit product
and must be read carefully prior to installation.
Target readership and qualifications
The product may only be installed by a qualified plumber.
Explanation of the key words and symbols
Is used to address practices not related to
NOTE
physical injury.
Link to the mounting instructions in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Check for leaks
> Action required

Safety instructions

Incorrect handling may result in product damage.
The metal frame is not resilient.
> Never hold the bathtub by the metal frame.
Product and/or property damage
A breach of local and country-specific regulations and standards
can cause damage to the product
and/or property damage.
> Observe the local installation regulations and any country-
specific standards at all times.
Prior to the installation
Please read the pre-installation data sheets. These are available
to download on the Internet at www.pro.duravit.com.

Mounting instructions

1
Holding the bathtub by the bathtub rim
> Never hold the bathtub by the metal
NOTE
frame.
2 8
Raising the bathtub
+
> Raise the bathtub at all four corners at the
NOTE
same time in order to avoid point loading
on the metal frame.
3 9
Turning the bathtub through 180°
+
> Always raise the bathtub and turn it
NOTE
completely, never tilt it via the metal
frame or the rim.
4
Placing cardboard underneath
> Insert cardboard underneath to protect the bathtub.
6
Taking the floor construction into account
> Take into account any unevenness of the floor when
setting the bathtub feet.
10
Adjusting the transition piece if necessary
> The flexible hose has a DN 50/DN 40 transition piece. Saw
off the flexible hose at a groove in the case of a DN 50
drain connection.
57227_MAL_Badewanne freistehend_XViu
5