System Initialization; Network Settings - Panasonic AW-HS50E Mode D'emploi

4. System settings

4-1-3. System initialization

[14] SYSTEM Menu
8. Initial
Select "Yes" and press the OSD/TIME dial, the setting data
is returned to the initial values.
  However, the video format settings and the network
settings will not be initialized.

4-1-4. Network settings

The network settings for upgrading the software versions
and other data can be selected.
[14] SYSTEM Menu
9. IP Address
This is used to set the IP address.
Initial value: 192.168.0.8
[14] SYSTEM Menu
10. Subnet Mask
This is used to set the subnet mask.
Initial value: 255.255.255.0
[14] SYSTEM Menu
11. Gateway
This is used to set the gateway.
Initial value: 192.168.0.1
Notes
  For the network settings to take effect, the unit must
be rebooted. Turn off the power, and then turn it back
on.
  When the same IP address as the IP address of
another device or an illegal IP address is set, the unit
may return an error when the IP address setting is
selected or the unit or other device may not operate
properly.
Consult the network administrator before setting the
IP address.
41 (E)