Panasonic AW-HS50E Mode D'emploi page 16

1. Basic operations
 Other chroma key settings 
 Marker Aspect 
[6] ChromaKey Menu
4. Marker Aspect
This item is used to change the aspect ratio of the sample
marker.
 Ref Adjust 
[6] ChromaKey Menu
5. Ref Adjust
This item makes it possible to change the colour to be used
as the chroma key reference from the sampled colour.
H (Hue):
Hue to be used as the reference
S (Saturation):
Colour saturation to be used as the reference
L (Luminance):
Luminance to be used as the reference
  After auto sampling is finished, the sampled values are
displayed.
 Y-Influence 
[6] ChromaKey Menu
6. Y-Influence
This item is used to set the extent of the influence to be
exerted by the Y (luminance) component.
When "0" is set as the Y-Influence value, the Y components
cease to exert any influence.
When the Y-Influence value is increased, both the range in
which the high-luminance components are missing and the
range in which the low-luminance components are missing
are narrowed down.
The Y-Influence setting is adjusted when the background
colours are reflected faintly in the white parts of subjects.
 Radius 
[6] ChromaKey Menu
7. Radius
This item is used to set the range of the colour to be defined.
H (Hue-Radius):
Extent of the range of the hue to be defined
S (Saturation-Radius):
Extent of the range of the colour saturation to be
defined
  After auto sampling is finished, the sampled values are
displayed.
 Soft 
[6] ChromaKey Menu
8. Soft
This item is used to adjust the amount of the soft effect on
the boundary of the colour to be defined.
 Cancel 
[6] ChromaKey Menu
9. Cancel
This item is used to adjust the amount of colour muting.
The colour muting is adjusted when the background colour
is superimposed over the subject.
 Memo 
Knack of adjusting the chroma key
The chroma key adjustments are facilitated by following the
steps below.
 Initiate automatic sampling, and decide on the colour
to be defined.
 Using the "7. Radius" item, adjust so that the
background colour is completely defined.
 Using the "8. Soft" item, finely adjust the key signal
boundary.
15 (E)