Key Adjustments - Panasonic AW-HS50E Mode D'emploi

1. Basic operations

1-3-6. Key adjustments

How the key is to be defined can be adjusted.
 Clip 
[5] KEY Adjust Menu
1. Clip
This item is used to set the reference level for creating the
luminance key and linear key.
  The item cannot be used when Chroma (chroma key/self
key) has been selected as the key type.
 Gain 
[5] KEY Adjust Menu
2. Gain
This item is used to set the amplification level of the
luminance key and linear key.
  The item cannot be used when Chroma (chroma key/self
key) has been selected as the key type.
 Density 
[5] KEY Adjust Menu
3. Density
This item is used to adjust key density.
When "0" is selected as the setting, the keys will no longer
be displayed.
 Invert 
[5] KEY Adjust Menu
4. Invert
This item is used to set key invert.
On: The internally generated key signal is inverted.
Off: The key signal is not inverted.
 Mask 
[5] KEY Adjust Menu
5. Mask
This item is used to set the masking method.
On: The area set using the "6. Mask Adjust1" and
"7. Mask Adjust2" items is masked.
Off: The key signal is not masked.
 Mask Adjust1, Mask Adjust2 
[5] KEY Adjust Menu
6. Mask Adjust1
7. Mask Adjust2
This item is used to set the area to be marked.
6. Mask Adjust1 item:
This sets the left (L) and right (R) of the area.
7. Mask Adjust2 item:
This sets the top (T) and bottom (B) of the area.
Mask area
Key signal valid area
50
T
(Mask-T) (25)
0
B
(Mask-B)
(-25)
-50
-50
  When the submenu [5] KEY Adjust Menu is displayed,
direct operations using the USER buttons and OSD/TIME
dial are enabled.
 Refer to "2-5-6. Direct operations using the USER
buttons and OSD/TIME dial" (<Basics> Operating
Instructions).
<Direct operation status display>
U1: Mask-L, U2: Mask-R, U3: Mask-T, U4: Mask-B
 Mask Invert 
[5] KEY Adjust Menu
8. Mask Invert
This item is used to set the mask signal inversion.
On: The mask signal is inverted.
Off: The mask signal is not inverted.
13 (E)
Video signal area
(-25) (25)
0 50
L R
(Mask-L) (Mask-R)