Displaying The Input Image Information - Panasonic AW-HS50E Mode D'emploi

2. Input/output signal settings

2-1-9. Displaying the input image information

[10.5] Input Menu/DVI-IN
Size
[10.5] Input Menu/DVI-IN
H-Freq
[10.5] Input Menu/DVI-IN
V-Freq
[10.5] Input Menu/DVI-IN
Dot Clock
These are used to display the information concerning the DVI-D input signal images.
The information cannot be changed.
Size:
This indicates the pixel count of the images.
H-Freq:
This indicates the horizontal frequency of the images.
V-Freq:
This indicates the vertical frequency of the images.
Dot Clock:
This indicates the dot clock frequency of the images.
The formats supported are listed below.
<DVI-D formats supported>
Input video signal
1024  768
XGA
1280  768
WXGA
1280  1024
SXGA
1680  1050
WSXGA+
1920  1200
WUXGA
1600  1200
UXGA
1920  1080
1080/50p
1920  1080
1080/59.94p
  If the format of the input signals is not supported, it may not be possible to import the signals properly, and a black image or
disturbed image may appear.
Dot clock frequency
(MHz)
Digital 65.0
Digital 79.5
Digital 108.0
Digital 148.3
Digital 154.0
Digital 162.0
Digital (RGB) 148.5
Digital (RGB) 148.5/1.001
33 (E)
Frequency
Horizontal Vertical
(kHz) (Hz)
48.36 60.00
47.78 59.87
63.98 60.02
65.29 59.95
74.04 59.95
75.00 60.00
56.25 50.00
67.50/1.001 60.00/1.001