Ayce ELVIS Mode D'emploi page 19

PRODUCT DESCRIPTION
1. Grid
2. Blades
Decoration (not used for
3.
handle the fan)
4. Motor
Oscillation button
5.
OPERATION
SPEED SELECTION:
Connect the plug to the power socket.
Your fan is equipped with a 4-position switch, to choose among
3 fan speeds or turned o .
6.
On/O /Speed switch
7. Base
8. Decorative hole
9. Head tilt knob
10.
Cable
0: Stop
1: Low speed
2: Middle speed
3: High speed
Operate the switch manually, by positioning the fan speed
you desired, as indicated above.
Oscillation:
Fan can oscillate from right to left, depending on your con-
venience. Button oscillation is placed at the back of the
motor cover. When the button is drawn, the fan does not
oscillate. When the button is pushed, the fan oscillates.
Adjust head tilt angle:
Turn the fan o and loosen the head tilt knob; move the
head of the fan up or down according to your need and
tighten the knob to fix the position.
CLEANING AND STORAGE
• Unplug the fan before cleaning.
• Use only a soft cloth to gently wipe the fan clean.
• DO NOT immerse the fan in water and never allow water
to drip into the motor housing.
• For storage, clean the fan carefully as instructed and store
your fan in a cool dry place.
36 37 36 37