JVC KD-AR7500 Mode D'emploi page 22

To make further precise settings for
the DSP modes
These settings you make are valid for all DSP
modes except "V.Cancel."
Setting items:
The number of the built-in speakers:
Select the number of the speakers built in
your car—"2ch" or "4ch."
• When you have four speakers (4ch) built
in your car, select your car size (see step 4
that follows).
Listening seat position:
Select the listening seat position where you
want to locate the sound image.
1
Repeat steps
21 to select DSP mode (except
"V.Cancel").
2
Select the number of the built-in
speakers.
2ch: Select for the two speaker
system.
4ch: Select for the four speaker
system.
3
22
~ to ! on page
2ch
4ch
• If you select "2ch," go
to step 5.
4
If you select "4ch," select your car
size.
Middle
Middle:
Select when the distance
from the rear speakers to
the listening seat position is
almost equal to that from the
front speakers.
Large: Select when the distance
from the rear speakers to
the listening seat position is
longer than that from the front
speakers.
Compact: Select when the distance
from the rear speakers to
the listening seat position
is shorter than that from the
front speakers.
5
Select your listening seat position.
All: For all front and rear seats.
Front: For the both front seats.
R.Front: For the front right seat.
L.Front: For the front left seat.
6
Finish the procedure.
Large
Compact
All Front
L.Front R.Front