Construction - Panasonic WV-CS954 Mode D'emploi

CONSTRUCTION

Camera Mounting Base
Ensuring Trouble-free Operation
• This camera uses a "slip ring" for transmission of electrical power and signals. A dirty slip ring can cause
deterioration of picture quality during panning and generation of noise.
In order to ensure trouble-free camera operation, make sure that the cleaning function (page 37) is turned on.
• If cleaning the slip ring does not eliminate poor picture quality and noise, it could mean that the slip ring has
reached the end of its service life. Contact a qualified service person or system installer to have it replaced.
Alarm Input Connector
Alarm Output Connector
Safety Wire
Decorative Cover (provided)
Camera
Dome Fix Ring
Dome Cover
Remove the camera first before removing the
dome cover (page 17).
Rotate the dome fix ring to the left to remove it.
Tighten the dome fix ring securely to prevent it from
coming loose. Securely anchor the camera when
removing the dome cover.
The dome cover is easily damaged,
and should be handled with care.
Lens
The lens cannot be replaced.
-10-
Video Output Connector
Data Port
Power Connector for Camera