Adjusting The Minimum Start Speed Of The Lens Zoom - Panasonic AW-RP555L Mode D'emploi

Operation
wAdjusting the minimum start speed of the lens zoom
Perform this adjustment to ensure that the lens zoom will function smoothly in response to
the angle to which the ZOOM lever is tilted when it is used to zoom the lens.
1. Use the CONTROL button to select the pan/tilt head whose lens zoom minimum start
speed is to be adjusted.
2. Press the IRIS button while holding down the MEMORY button.
3. The IRIS button lamp starts flashing, and the standby status is established.
4. Press the IRIS button to establish the setting mode. The lamps of both the MEMORY
button and IRIS button start flashing. If the joystick is operated at this point, the
adjustment will be forcibly terminated.
5. Press the PRESET 1 to 8 buttons to set the compensation amounts. This amount
is lowest for the PRESET 1 button and highest for the PRESET 8 button. When the
PRESET 10 button is pressed, the compensation is set to OFF. When the PRESET 1
to 8 and 10 buttons are pressed, the lamp of the IRIS button stops flashing, and the
setting mode is exited.
6. Move the ZOOM lever slowly and, while monitoring the image on the monitor, check
whether the lens zoom starts moving smoothly.
If the lens zoom fails to starts moving smoothly, repeat steps 2 to 5 and find the
optimum value.
7. Repeat steps 2 to 6 for the other pan/tilt heads.
27 (E)