Bosch GML 24 V PROFESSIONAL Manuel D'utilisation page 20

1 609 929 J80.book Seite 5 Montag, 27. März 2006 3:27 15
Selecting Preset Radio Stations
Before setting a radio station, reduce the volume to
as low as possible.
Select the desired FM or AM frequency band.
Press the PRESET forwards 25 or back but-
ton 26 (GML 24 V) or the radio function PRE-
SET button 13 (GML 24 V-CD) to select the de-
sired preset number.
CD Player Operation (GML 24 V-CD)
Press the CD/AUX/Radio FM/Radio AM operating
mode button 22 until CD 39 is indicated in the dis-
play.
Inserting and Playing a CD
Press the CD OPEN/CLOSE button 11 to open
the CD drive assembly 10.
Place the CD centrally on the CD drive assem-
bly, with the inscription facing upward.
Press the CD OPEN/CLOSE button 11 to close
the CD drive assembly 10.
Press the TRACK button 13 right or left to select
the desired track, which is displayed in the CD
track number indicator 41.
Press the START/PAUSE button 12 to the right;
playback of the track begins.
By turning the REV and FAST FORWARD con-
trol knob 14, you can move to a certain location
within a track.
Press the START/PAUSE button 12 to the right;
playback is stopped. Pressing the button again
initiates playback from where it was stopped.
Press the STOP button 12 to the left to end the
playback.
Programming the Playback
You can play back the tracks of a CD in any
sequence by programming them in the desired
order. The program can include up to 20 tracks.
Insert the CD, but do not start the playback.
Press the CD function program memo but-
ton 17.
Select the desired track with the TRACK but-
ton 13 which appears in the indicator for the CD
track number 41. Press the MEMORY button 17
for the CD function program memo, to take over
the track in the program.
Press the START button 12 to the right; play-
back begins.
1 609 929 J80 • 06.03
Repeated CD Playback
You can play all tracks on a CD repeatedly. After
the last track has run off, the playback begins with
the first track.
Insert the CD, but do not start the playback.
Press the CD MODE button 16 (REPEAT) until
the REPEAT indicator 33 appears in the dis-
play 4.
Press the START button 12 to the right; play-
back begins.
Repeated Playback of a CD Track
You can repeatedly play a track on a CD. After the
track has run off, the playback begins again.
Insert the CD and start the playback of the de-
sired track.
Press the CD MODE button 16 until the RE-
PEAT indicator 33 flashes in the display 4.
Press the START button 12 to the right; play-
back begins.
Random CD Playback
You can mix all tracks and play them randomly.
When this function is performed again, the play-
back can be completely different.
Insert the CD, but do not start the playback.
Press the CD MODE button 16 until the RAN-
DOM indicator 32 appears in the display 4.
(RANDOM)
Press the START button 12 to the right; play-
back begins. The tracks are played in random
sequence.
To continue the playback even after playing the
last track, press the CD MODE button 16 until
the RANDOM indicator 32 and the REPEAT in-
dicator 33 appear in the display 4.
Press the START button 12 to the right; play-
back begins.
English–5