Headboard Bracket Installation Guide - Ergomotion 390 Série Mode D'emploi

headboard bracket installation guide

A 9/16" & 1/2" socket and crescent wrench are necessary to complete installation.
STEP 1
a .) Align the hole in the bracket to the brass sleeve into which the
leg threads . Hold the bracket in place and screw the leg into the
base until it is snug . DO NOT OVERTIGHTEN . Too much force
may cause the leg to spin freely .
b) Align the tab with the hole in the frame (located towards the foot
of the base) and use a short bolt and nut to secure the bracket .
Make sure the bolt is tight .
10