Ergomotion 390 Série Mode D'emploi page 11

remote control
ADJUST
The HEAD arrows lift
and lower the head section
of the base .
The FOOTarrows lift
and lower the foot section of
the base .
The TILT arrows
customize the level of head
support .
The LUMBAR arrows
customize the level of
lumbar support .
SAVE UP TO TWO FAVORITE POSITIONS
To program:
Press and hold one of the
buttons for at least 5 seconds . The
LED lights at top of remote will flash in
succession 3 times .
Position is now saved .
To restore the preset buttons back to
their original factory settings:
Hold FLAT and ZERO-G simultaneously for
at least 5 seconds . The LED lights at top of
remote will flash in succession 3 times.
The original presets will be restored .
ONE TOUCH BUTTONS
One touch LIGHT button
activates and turns off the
safety lighting feature .
One touch ZERO G
®
position . Zero G adjusts
®
your legs to a higher level
than your heart helping
to relieve pressure off the
lower back and promote
circulation .
One touch FLAT preset
position .
One touch LOUNGE preset
position .
One touch TV/PC preset
position .
preset
9