Installation Guide - Ergomotion Serta Motion Perfect Manuel Du Propriétaire

installation guide

Always use two people when setting up the base.
If installing a Divided King, please refer to the Divided King Quick Start Guide.
STEP 1
Place the bed base box in a desired location with the top of the
box facing up .
Remove the binding straps and packing materials, making sure not
to puncture the box with any sharp objects .
STEP 2
Remove the bed base from the box keeping the bottom of the
base facing upwards .
STEP 3
To install Headboard Brackets (sold separately)
see instructions on page 18.
To install the legs, thread the washer over the screw on the leg .
Next, screw the leg into the nutsert on the frame . Do not over
tighten.
The legs untwist into separate sections for custom 3 different leg
height options .
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
8
STEP 4
To sync two bases see detailed installation
instructions on page 14.
Locate the battery backup strap and set it aside . Be sure that it is
accessible after the base is set up .
STEP 5
Uncoil input Power Cord (connected to
Control Box's power port) and plug into
Power Supply .
STEP 6
Uncoil the Power Cord and connect to the
Power Supply . Place Power Supply on the
ground and extend from the base . Ensure
that the Power Supply and all attached
cords are directed toward the desired surge
protector .