Syncing Two Bases - Ergomotion Serta Motion Perfect Manuel Du Propriétaire

syncing two bases (optional)
A Sync Cord is included with the base. Not available on Queen, Full or Full-Long size bases.
The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases. This process is
most commonly used for connecting two TXL bases.
STEP 1
Unplug bases from power source .
STEP 2
Connect each end of the Sync Cord into the Multifunction port of
each control box .
STEP 3
Plug bases back into the power source .
STEP 6
Check to ensure all cords are securely attached . Both remotes
will now operate both bases simultaneously .
14
The system is now linked . Buttons pressed on either remote
will control both bases simultaneously .
Sync Cord
Control Box 1
PERFORMANCE NOTES
If bases become mismatched, pressing the FLAT button will
re-sync the mechanical positions .
Control Box 2