Emergency Battery Backup Strap - Ergomotion Serta Motion Perfect Manuel Du Propriétaire

emergency battery backup strap

For emergency use only, in case of a power outage.
Batteries are not to be used for normal operation of the bed.
STEP 1
Disconnect the Power Supply from the input power cord .
STEP 2
Connect the Battery Backup Strap to the (2) Alkaline 9 Volt
batteries . Do not mix brand name Batteries .
STEP 3
Connect the end of the Battery Backup Strap to the input
power cord that is attached to the control box .
Battery Backup Strap
Input Cord
Note: Detach the Battery Backup Strap after the emergency is
over, as the system will continue to draw power from the batteries
even if not in use .
Control Box
15