Battery Backup Strap - Ergomotion Serta Motion Essentials Manuel Du Propriétaire

battery backup strap (optional)
For emergency use only, in case of a power outage .
Batteries are not to be used for normal operation of the bed .
STEP 1
Disconnect the Power Supply from the input power cord.
STEP 2
Connect the Battery Backup Strap to the (2) Alkaline 9 Volt
batteries. Do not mix brand name Batteries.
10
STEP 3
Connect the end of the Battery Backup Strap to the input
power cord that is attached to the control box.

Battery Backup Strap

Input Cord
Note: Detach the Battery Backup Strap after the emergency is
over, as the system will continue to draw power from the batteries
even if not in use.
Control Box