connecting strap (optional)
If any split setup is being installed (excluding Divided King), plastic connecting straps are provided
(one per base) to secure the bases together . Use both straps to secure the head and foot portions together .
STEP 1
With the bases in their desired location, slightly loosen both legs
to allow the strap to fit on the leg bolt, between the leg washer
and frame .
12
STEP 2
Slide side (a) of the connecting strap onto leg bolt . Swing the
strap and connect side (b) to the leg bolt . Secure the strap by
shifting to the left .
a
STEP 3
Re-tighten legs . Do not over tighten . Use the remaining strap
and repeat on other end of the base .
b