Table des Matières
Publicité
setting up two bases
OVERVIEW
If a split setup is being installed, plastic connecting straps are provided (one per base) to secure the bases
together . Use both straps to secure the head and foot portions together .
STEP 1
With the bases in their desired location, slightly loosen both legs to allow
the strap to fit on the leg bolt, between the leg washer and frame .
16
Connecting straps are secured to the base frame upon delivery.
STEP 2
Slide side (a) of the connecting strap onto leg bolt . Swing the strap and
connect side (b) to the leg bolt . Secure the strap by shifting to the left .
STEP 3
Re-tighten legs . Do not over tighten . Use the remaining strap and repeat on
other end of the base .
a
b
Publicité
Table des Matières
