Table des Matières
Publicité
safety precautions and usage statements
support platform shall be ± 3°, which translates to a tolerance of up to 1 ½" .
All Ergomotion adjustable foundations, depending on make and model, are designed and manufactured to perform and
function within designated quality control parameters. Bases are subject to meticulous and rigorous inspections during
the quality control process to ensure bases will operate within these standards during normal operating use.
Normal operating use is defined as the following:
The angle (designated "b" in figure
1) between the flat section and foot
section for various configurations
of the mattress support platform
shall be ± 3°, which translates to a
tolerance of up to ¾" .
Any adjustable foundation deemed
to be within these allocated
tolerances is considered to have
met the manufacturer's quality
The angle (designated "α" in figure 1) between the back section and the flat section for various configurations of the
mattress support platform shall be ± 3°, which translates to a tolerance of up to 1 ½".
control standards .
The angle (designated "β" in figure 1) between the flat section and foot section for various configurations of the mattress
support platform shall be ± 3°, which translates to a tolerance of up to ¾".
When operating a "paired" split base setup there may be a time latency up to 1.5 seconds between each bases articulation.
Any adjustable foundation deemed to be within these allocated tolerances is considered to have met the manufacturer's
quality control standards.
THAT "NEW PRODUCT" SMELL:
Blake Pettit
Some people notice a slight odor to their new adjustable base—this can
Quality Assurance Manager
Ph 805-979-3875
come from our material manufacturing process . This smell is normal and
Fx 805-979-9399
www.ergomotion.com
usually disappears before the product reaches you . Sometimes, however,
this smell may still be noticeable . It usually disappears after a few weeks,
Ergomotion Inc.
providing adequate ventilation of the product and the environment .
BREAK IN PERIOD:
You can speed up the break-in period by simply spending time in the
adjustable bed through activities such as reading, watching TV or playing
with the kids or grandkids . The extra movement will help the adjustable
base respond to weight and temperature changes . Some of the materials
in our adjustable bases such as the woods, metals and plastics used in
the platform, frame and components are sensitive to moisture content and
temperature and may make sounds in colder environments .
PAIRED OPERATION:
When operating a "paired" split base setup there may be a time latency up to
1 .5 seconds between each bases articulation .
Adjustable
Bed Tolerance
-Adjustable foundation is to be operated with a mattress and load. Testing procedures require lifetime cycle
tests with up to 120kg distributed load.
(β°)
|
ph 1-888-550-3746
|
fx 805-979-9399
|
www.ergomotion.com
WEAR AND TEAR:
Wear and tear is damage that naturally and inevitably occurs as a result of
normal use or aging .
FABRIC CARE:
(α°)
To prolong the life of your fabric, protect from direct sunlight whenever
possible . For spot cleaning, wipe area with a light damp sponge or vacuum
with a soft brush attachment to remove particles . Keep at a minimum of 30cm
(12 inches) away from direct heat sources . For a deeper cleaning, blot liquid
spills with a clean dry cloth . Wipe with a clean cloth dampened with warm
water . Do not wet excessively . A soft bristle brush may be used to remove
ingrained soil . Avoid scratching by gentle brushing . Wipe with a clean cloth
dampened with warm water to remove residues . Dry in shade away from direct
heat . If persistent marks remain visible after cleaning, seek professional advice .
PRODUCT RATINGS:
The lift motors are not designed to operate continuously for more than
[2] minutes in an [18] minute time period or approximately 10% duty
cycle . Attempting to circumvent or exceed this rating will shorten the life
expectancy of the product and may void the warranty . The massage motors
are not designed to operate continuously for more than 30 minutes at a time .
Please allow the massaging system to rest for 30 minutes after automatic
massage shut off before restarting .
WEIGHT LIMITS:
This product is not rated to support weights exceeding 850 pounds (or)
650 pounds . This product is not rated to support weights in excess of 850
pounds (or) 650 pounds inclusive of the mattress and bedding . The base will
structurally support this weight, provided it is evenly distributed across the
bed base . The adjustable base is not designed to support or lift this amount
in the head or foot sections alone . Exceeding this weight restriction could
damage the bed and/or cause injury and will void the warranty .
3
Publicité
Table des Matières
