Table des Matières
Publicité
syncing two bases (optional)
OVERVIEW
When using a synced setup with two bases, each remote can be paired to both bases . Pairing to both bases will allow the remotes to control each base
individually or both simultaneously .
To enable switch operation and pair to both bases, follow the steps below .
STEP 1
Locate the Power Down Box connected
to the base and press the button TWICE .
A light on the Battery Backup Box will
illuminate .
STEP 2
Remove back cover of the remote and press and hold down
the PAIR button . The PAIR button will illuminate blue and start
flashing . When the PAIR button stops flashing, the illuminated
light on the Battery Backup Box will go out . Release the PAIR
button . The remote is now paired .
14
Publicité
Table des Matières
