Daily Usage Of The Utv 2; Step 5: Wearing Your Udirect 2; Step 6: Listening To The Tv - Unitron uTV 2 Manuel D'utilisation

Masquer les pouces Voir aussi pour uTV 2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Daily usage of the uTV 2

First switch on both devices as described in step 3.

Step 5: Wearing your uDirect 2

Before any phone, music or TV streaming can
take place, the uDirect 2 must be switched ON
and worn correctly as shown below:
1. Put the neckloop around
your neck (easily done
by unplugging one
neckloop plug).
2. Make sure both plugs
are well connected in the
neckloop sockets.
3. Switch the uDirect 2 ON.
After switching uDirect 2 ON, it automatically
recognizes your Unitron wireless hearing aids.
In cases of interference with other hearing aids,
contact your hearing healthcare professional.
14

Step 6: Listening to the TV

You will hear the sound of the TV directly in your
hearing aids.
If you cannot hear the sound of your TV through
uTV 2, repeat steps 1 to 5.
The uTV 2 supports Bluetooth operation up to
a range of 30 m (100 ft). Line-of-sight between
your uDirect 2 and the uTV 2 is not required.
However, interference in the environment by
walls or furniture may reduce the operating
range.
If the uDirect 2 moves out of range of the
uTV 2, the wireless audio transmission will be
terminated. If the uDirect 2 is then moved back
into range of the uTV 2, it will automatically
resume streaming to your hearing aids.
It may take up to 10 seconds until the streaming
resumes. Both streaming light indicators, (g)
should be solid blue during streaming.
15

Publicité

Table des Matières
loading

Table des Matières