Step 9: Switching Off Utv 2 And Udirect 2 - Unitron uTV 2 Manuel D'utilisation

Refer to the uDirect 2 user guide for pairing
instructions of uDirect 2 with the mobile phone
or other entertainment and communication
devices such as radios or personal computers.

Step 9: Switching off uTV 2 and uDirect 2

To switch off the devices:
To end the transmission of the TV audio signal,
switch off the uTV 2 by pressing the ON/OFF
button (a) as shown in fig. 7.
Fig. 7
20
(a)
If uDirect 2 is not used for other purposes such
as phone calls, switch it off by sliding the power
switch to the OFF position as shown in fig. 8.
The uDirect 2 power indicator will blink red first,
then solid for 2 seconds to indicate complete
shut-down.
OFF
Fig. 8
If no audio input is available, the uTV 2
automatically stops the Bluetooth audio
transmission to uDirect 2 after 5 minutes.
Its status light will blink green.
21