Installing The Batteries - Kichler Jade Manuel D'instruction

12. INSTALLING THE BATTERIES

Remove the face plate of the Wall Switch by
lifting at the top and then inserting the supplied
12V battery. Duracell MN21/Eveready A23/ GP
23A all 12V.
Replace the switch face plate.
To prevent possible damage to the transmitter,
remove these batteries if not used for long
periods of time (months).
13. OPERATING INSTRUCTIONS
HI Button
=
MED Button =
LOW Button
=
FAN OFF Button =
LIGHT Button
=
REV Button =
Speed settings for warm or cool weather depend
on factors such as the room size, ceiling height,
number of fans and so on.
NOTE:
To operate the reverse function on this
fan, press the reverse button while the fan is
running.
High Speed
Medium Speed
Low Speed
Motor Off
Light ON or OFF
The "REV" button is
used to set the fan
forward or reverse,
press the button
forward (for warm
weather) or reverse
(for cool weather).
60" Jade
HI
MED
LOW
FAN OFF
ON ECE
1 2 3 4
Fig. 20
Fig. 21
10