Accessories; Service And Repair - Leister COMET Instructions D'utilisation

Accessories

• Only Leister accessories should be used.
Training
• Leister Technologies AG and its authorised Service Centres offer free welding courses and training.
Informationen below www.leister.com.
Maintenance
•
Clean the hot wedge (7) with a wire brush.
• Clean the drive and pressure roller (20/21) with a wire brush.
• Treat the chain (22) with a suitable spray as required.
• Check power supply cord (1) and plug for electrical and mechanical damage.

Service and repair

• The tool should be checked after a maximum of approx. 1000 hours running time by an authorised Ser-
vice Centre
• Repairs should only be carried out by authorised Leister Service Centres. They guarantee a correct and relia-
ble repair service within 24 hours, using original spare parts in accordance with the circuit diagrams and
spare parts lists.
Warranty
• For this tool, we generally provide a warranty in accordance with the statutory / country-specific regulations
from the date of purchase (verified by invoice or delivery document). Damage that has occurred will be corrected
by replacement or repair. Electrical hot wedge are excluded from this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded from the warranty.
• Warranty claims will be rejected for tools that have been altered or changed by the purchaser.
32