Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
GB
Please read operating instructions carefully before use
and keep for future reference.
Leister COMET
Automatic Wedge Welding Machine
Application
• COMET for tunnel construction, groundworks and hydraulic engineering
Overlap welding and confectioning films and sealing membranes.
Maximum overlap width 125 mm
• COMET for sub-roof
Overlap welding and confectioning sub-roof films and sealing membranes with a defined overlap
width of 60 – 70 mm
• Type of seam
Welding seams are produced in accordance with DVS 2225 part I and BAM. Other dimensions are possible on
request.
DVS: German Welding Association
CAUTION: For welding materials made of PVC a special machine with a steel wedge must be used.
95 mm
Length of
Type of Material
Wedge
PE-HD, PP, TPO...
Copper
PE-LD
50 mm
Length of
Type of Material
Wedge
PE-HD, PP, TPO...
Copper
PE-LD
Steel
PVC-P
18
(Translation of the original operating instructions)
Material Thickness
Guide value
1.0 – 2.5 mm
1.5 – 3.0 mm
Material Thickness
Guide value
0.5 – 1.5 mm
1.0 – 2.0 mm
1.0 – 2.0 mm
70 mm
Length of
Type of Material
Wedge
PE-HD, PP, TPO...
Copper
PE-LD
Steel
PVC-P
20 mm
Length of
Type of Material
Wedge
PE-HD, PVC-P,
Steel
PE-LD, TPO...
Material Thickness
Guide value
1.5 – 2.0 mm
2.0 – 3.0 mm
2.0 – 3.0 mm
Material Thickness
Guide value
0.5 – 1.0 mm
Publicité
Table des Matières
